dB Matting 15mm

	Impact Rating: 47dB L nTw
	Airborne Rating 58dB DnTw +C tr
	Thickness 15mm
	Sheet Dimensions: 1.25m x 1.0m
	Area: 1.25㎡

What is db Matting?

dB Matting 15 is a high performing acoustic floor product to be used in Residential, Commercial and Industrial projects.  The dB Matting range has been uniquely engineered to reduce both impact and airborne sound when laid over a structure.

dB Matting is unique in as an acoustic matting as it can have a timber or laminate floor finished laid directly onto it without the requirement or a layer of ply or MDF. If the subfloor is level the dB Matting can be laid over the subfloor and the laminate or engineered wood can be laid directly over the rubber matting. This is due to the low deflection rate of the material, meaning there is little compression under a load. The dB Matting 15 as a deflection of just 0.4mm.

dB Matting can also be used under Luxury Vinyl Tile (LVT) when coupled with the Jumpax dual overlay board.

The acoustic rubber mat ensures high levels of impact sound reduction are met and due to the mass of the products there is also a high level of airborne noise reduction.

dB Matting 15 is very versatile and easy to cut with a sharp long-bladed Trimming Knife.  Score the surface then run through with the knife several times to avoid tearing.

When used in the correct application, dB Matting 15 can be installed over timber, concrete and screed applied floors with lath and plaster, suspended timber/metal ceilings or Resilient Bar ceilings to ensure compliance to all UK Building Regulations.

We have test data for dB Matting on most floor build-ups.  Please contact SIS if you require acoustic test data for your project.

Please consult the dB Matting Datasheet for full installation & performance information.

Ensure to check with your floor finish manufacturer if dB Matting is compatible to be laid directly under your specific floor finish.

Dimensions:  1250mm x 1000mm x 15mm (15kg per sheet)

To be used with our F3 Adhesive and Acoustilay Perimeter Strip if the carpet is to be installed over the top of the dB Matting 15.

The team at SIS say:  This is a very popular underlay product for both refurbishment & new build projects due to the weight, performance and ease of installation.  We see this as a great quick-fix solution to increase the performance of any floor and reduce the need to uplift existing floorboards etc.

If your room is 4m x 3m = 12m² / 1.25 = 9.6 so rounded up = 10 Sheets required. 

Technical Data